Installing Ceiling Mount Porch Light : Ceiling Mounted Outdoor Light With Motion Sensor

Pull the old lamp wires through the fixing tube and the old lamp to one side. Unscrew the retaining screws on the old holder to remove it, and then screw the new lamp holder into place. Adjust the chain of the new light installation, if you have one, with thin-tipped pliers to open and close the links. Pull the lamp wires through the tube into the bracket. Match the same color cables to each other and twist the cable nuts into the paired cables. Secure the cable nuts in place by wrapping insulation tape around the cables and the cable connection. Screw the new lamp plate into the ceiling, and then install light bulbs and shadows into the ceiling mount porch light. Turn the switch back to the “ON” position and activate the new light on.

This photo of Ceiling Mounted Outdoor Light With Motion Sensor has dimension 768 x 960 pixels, you can download and obtain the Ceiling Mounted Outdoor Light With Motion Sensor photo by right click on the right click to get the hi-res version.

Here is essential advice on Ceiling Mount Porch Light Motion Sensor. We have the tops sources for Ceiling Mount Porch Light Motion Sensor. Check it out for yourself! You can gather Ceiling Mounted Outdoor Light With Motion Sensor guide and read the latest Installing Ceiling Mount Porch Light in here.

Back to Installing Ceiling Mount Porch Light

Comments are closed.