How to Support a Shed Roof Screened Porch Plans : Top Shed Roof Screened Porch Plans

How to support a shed roof screened porch plans. Identify a place on a wall of the house to fix one end of the roof of the shed; which should be sufficient to allow a slope of at least 2 inches per foot to the high outer edge, for example 20 inches higher than the outer posts for a large 10-foot yard. Locates carcasses to support the roof, rim joists in a two-story house, bottom wall tiles or tacks in a one-story house. Remove the facade of the house with a lever bar at the chosen height and the width of the porch. Mark the location of the posts or other attachment points. Measure the appropriate height with a tape measure at both ends of that area and draw a chalk line to mark the top of a 2 by 6 inch primary beam to extend 1 1/2 inches beyond the width of the yard at each end.

This photograph of Top Shed Roof Screened Porch Plans has dimension 1024 x 768 pixels, you can download and gain the Top Shed Roof Screened Porch Plans photograph by right click on the right click to get the hi-res version.

Here is imperative recommendation on Elegant Shed Roof Screened Porch Plans. We have the prime sources for Elegant Shed Roof Screened Porch Plans. Check it out for yourself! You can acquire Top Shed Roof Screened Porch Plans guide and see the latest How to Support a Shed Roof Screened Porch Plans in here.

Back to How to Support a Shed Roof Screened Porch Plans

Comments are closed.