How to Make Front Porch Awning : Metal Front Porch Awnings

Mount 2 of 6 inch main book aboard the side of the house at the desired height of the front porch awning, usually 8 to 10 meter high. Connect as many discs as needed to cover the length of the veranda. Attach the card with a backing screw or bolt at one end, leveling the board, add a second bolt, then fasten with two more screws at the other end. When both ends are level and safe, add two more bolts each 4 meters. Install U shaped mounting base each of the outer corners of the veranda. These bases screw in the veranda floor, eliminating the need for post holes. If buried posts are required, dig 3 meter holes, add about 6 inches of gravel and pack gravel to provide a stable ground with sufficient drainage.

This photo of Metal Front Porch Awnings has dimension 1024 x 768 pixels, you can download and get the Metal Front Porch Awnings photo by right click on the clicking the right mouse to get the large version.

Here is essential clue on Front Porch Canvas Awnings. We have the excellent method for Front Porch Canvas Awnings. Check it out for yourself! You can gather Metal Front Porch Awnings guide and look the latest How to Make Front Porch Awning in here.

Back to How to Make Front Porch Awning

Comments are closed.