How to Make Front Porch Awning : Front Porch Aluminum Awning

Front porch awning, insert 4-inch insert into the U shaped mounting base rack attached with a screw through each of the guide holes in the bracket. If you have to dig a post hole, put the post into the hole, fill the hole with wet concrete and let it solidify. Hold the post with 2 on 4-inch board while the concrete cures; Insert a screw through an end of 2 by 4 and into the post and then tear the other end of the 2 by 4 down into the ground so that it does not slip. Drill a 1/4 “pilot hole through the tips of posts, about 3 inches from the top. Drill a test hole through the center of each end of a 2 of 6 inch board.

This digital photography of Front Porch Aluminum Awning has dimension 1024 x 469 pixels, you can download and take the Front Porch Aluminum Awning digital photography by right click on the right click to get the hi-res version.

Here is fundamental recommendation on Front Door Porch Awnings. We have the world class substance for Front Door Porch Awnings. Check it out for yourself! You can gather Front Porch Aluminum Awning guide and read the latest How to Make Front Porch Awning in here.

Back to How to Make Front Porch Awning

Comments are closed.