How to Make Front Porch Awning : Front Door Awning Australia

Front porch awning, insert 4-inch insert into the U shaped mounting base rack attached with a screw through each of the guide holes in the bracket. If you have to dig a post hole, put the post into the hole, fill the hole with wet concrete and let it solidify. Hold the post with 2 on 4-inch board while the concrete cures; Insert a screw through an end of 2 by 4 and into the post and then tear the other end of the 2 by 4 down into the ground so that it does not slip. Drill a 1/4 “pilot hole through the tips of posts, about 3 inches from the top. Drill a test hole through the center of each end of a 2 of 6 inch board.

This image of Front Door Awning Australia has dimension 1024 x 706 pixels, you can download and get the Front Door Awning Australia image by right click on the right click to get the hi-res version.

Here is needful notification on Front Door Porch Awnings. We have the tops source for Front Door Porch Awnings. Check it out for yourself! You can acquire Front Door Awning Australia guide and look the latest How to Make Front Porch Awning in here.

Back to How to Make Front Porch Awning

Comments are closed.