How to Make Front Porch Awning : Front Door Aluminum Awning

Front porch awning, insert 4-inch insert into the U shaped mounting base rack attached with a screw through each of the guide holes in the bracket. If you have to dig a post hole, put the post into the hole, fill the hole with wet concrete and let it solidify. Hold the post with 2 on 4-inch board while the concrete cures; Insert a screw through an end of 2 by 4 and into the post and then tear the other end of the 2 by 4 down into the ground so that it does not slip. Drill a 1/4 “pilot hole through the tips of posts, about 3 inches from the top. Drill a test hole through the center of each end of a 2 of 6 inch board.

This picture of Front Door Aluminum Awning has dimension 1024 x 683 pixels, you can download and obtain the Front Door Aluminum Awning picture by right click on the right click to get the high-res version.

Here is important advice on Diy Front Porch Awning. We have the greatest source for Diy Front Porch Awning. Check it out for yourself! You can acquire Front Door Aluminum Awning guide and look the latest How to Make Front Porch Awning in here.

Back to How to Make Front Porch Awning

Comments are closed.