How to Make Front Porch Awning : Copper Front Porch Awnings

Front porch awning, insert 4-inch insert into the U shaped mounting base rack attached with a screw through each of the guide holes in the bracket. If you have to dig a post hole, put the post into the hole, fill the hole with wet concrete and let it solidify. Hold the post with 2 on 4-inch board while the concrete cures; Insert a screw through an end of 2 by 4 and into the post and then tear the other end of the 2 by 4 down into the ground so that it does not slip. Drill a 1/4 “pilot hole through the tips of posts, about 3 inches from the top. Drill a test hole through the center of each end of a 2 of 6 inch board.

This photograph of Copper Front Porch Awnings has dimension 1024 x 684 pixels, you can download and enlist the Copper Front Porch Awnings photograph by right click on the right click to get the large version.

Here is main advice on Diy Front Porch Awning. We have the finest sources for Diy Front Porch Awning. Check it out for yourself! You can acquire Copper Front Porch Awnings guide and see the latest How to Make Front Porch Awning in here.

Back to How to Make Front Porch Awning

Comments are closed.