Copper Porch Light Install : Solid Copper Porch Light

Press the “T” connector on the cable in the center of the drive. Insert the plug into the cable so that its pin pierces the insulation of the cable. Connect another long cable to the remaining connector of “T” in the same way, and then run this cable back to the transformer. Strip 1/2 inch of the insulation on the cable closest to the transformer with a wire stripping. Connect the blank wires to the terminal screws on the transformer, and then tighten the screws with a screwdriver. Connect the transformer power cord to the wall socket. Insert the plug of each copper porch light into the cable in the ditch, to ensure that the pin in each connector pierces the insulation on the cable. The luminary should be lit if it is properly connected.

This images of Solid Copper Porch Light has dimension 1024 x 768 pixels, you can download and enlist the Solid Copper Porch Light images by right click on the right click to get the high resolution version.

Here is main science on Copper Exterior Lighting. We have the cool resources for Copper Exterior Lighting. Check it out for yourself! You can get Solid Copper Porch Light guide and read the latest Copper Porch Light Install in here.

Back to Copper Porch Light Install

Comments are closed.