Copper Porch Light Install : Copper Porch Light

Press the “T” connector on the cable in the center of the drive. Insert the plug into the cable so that its pin pierces the insulation of the cable. Connect another long cable to the remaining connector of “T” in the same way, and then run this cable back to the transformer. Strip 1/2 inch of the insulation on the cable closest to the transformer with a wire stripping. Connect the blank wires to the terminal screws on the transformer, and then tighten the screws with a screwdriver. Connect the transformer power cord to the wall socket. Insert the plug of each copper porch light into the cable in the ditch, to ensure that the pin in each connector pierces the insulation on the cable. The luminary should be lit if it is properly connected.

This photo of Copper Porch Light has dimension 768 x 768 pixels, you can download and gain the Copper Porch Light photo by right click on the right click to get the hi-res version.

Here is imperative recommendation on Copper Porch Light. We have the tops substance for Copper Porch Light. Check it out for yourself! You can find Copper Porch Light guide and look the latest Copper Porch Light Install in here.

Back to Copper Porch Light Install

Comments are closed.