Copper Porch Light Install : Copper Exterior Lighting

Press the “T” connector on the cable in the center of the drive. Insert the plug into the cable so that its pin pierces the insulation of the cable. Connect another long cable to the remaining connector of “T” in the same way, and then run this cable back to the transformer. Strip 1/2 inch of the insulation on the cable closest to the transformer with a wire stripping. Connect the blank wires to the terminal screws on the transformer, and then tighten the screws with a screwdriver. Connect the transformer power cord to the wall socket. Insert the plug of each copper porch light into the cable in the ditch, to ensure that the pin in each connector pierces the insulation on the cable. The luminary should be lit if it is properly connected.

This photograph of Copper Exterior Lighting has dimension 768 x 768 pixels, you can download and take the Copper Exterior Lighting photograph by right click on the clicking the right mouse to get the hi-res version.

Here is fundamental knowledge on Copper Outdoor Porch Lights. We have the world class source for Copper Outdoor Porch Lights. Check it out for yourself! You can gather Copper Exterior Lighting guide and read the latest Copper Porch Light Install in here.

Back to Copper Porch Light Install

Comments are closed.