Concrete Porch Window Systems : Porch Window Systems And Doors

Porch window systems, measure the width of the well window as well as the depth of the well from the inside edge of the well than the outer edge well using a tape measure. Cut two 2-by-10-inch boards to fit the measured width of window pits using a circular saw. Cut the boards lengthwise to adjust the depth. Place one of the gaskets along the bottom of the window well so that the gasket is flush with the inside and outside edges of the window. A carpenter level at the top of the board and adjust the board so it is level. Slide wooden wedges under the board to hold in level position. Drive concrete nails through the base board of the window with a hammer. Space the nails every 5 inches along the length of the board.

This photo of Porch Window Systems And Doors has dimension 1200 x 900 pixels, you can download and take the Porch Window Systems And Doors photo by right click on the right click to get the high-res version.

Here is imperative science on Porch window systems Home Depot. We have the prime assets for Porch window systems Home Depot. Check it out for yourself! You can find Porch Window Systems And Doors guide and read the latest Concrete Porch Window Systems in here.

Back to Concrete Porch Window Systems

Comments are closed.